Pipeloops
SHOP | Request Trial | My Account/Register  |  Cart Contents  |  Checkout  |  English    Deutsch      
Stay informed: Subscribe to our Newsletter
Röver organ Ditfurt/Germany 115.00EUR
Description

About the Organ:

The organ of the St. Bonifatius church in Ditfurt/Germany has been built by Ernst Röver in 1903. Röver was one of the foremost organ builders in the eastern parts of Germany of the late romantic area. More than 60 of his organs are still in existance in this area of the contry. 

Rövers organs are characterized by a large number of foundation stops of different tonal colors, mixtures without breaks and a sparing use of reeds. For this organ this means that about 2/3 of all stops are 16' and 8' stops providing the organist with a huge pallette of sounds. Both mixtures are straight without breaks, and the organ uses only two reeds, the Hauptwerk trumpet and the powerful Pedal Posaune.

His organs are also known for exceptionally high quality, he used the best materials available and put much emphasis on good craftsmanship, making his organs work flawlessly for very long. Röver brought the pneumatic unit chest to a level of perfection that yielded a response without noticable lag, making this pneumatic action organ respond as directly as a good tracker action. The action is also operating very quietly, and, since most of the sensitive parts are protected inside the wind chest, it is working nearly maintenance free for decades.

The organ has survived all modernization trends, maintaining its tonal characteristics basically unchanged. In 2006 it was restored to perfect working condition and some pipework that had been replaced by lower quality material during the wars of the past century could be replaced with new pipes made of the original material.

This organ is now a premier example of the late romantic period and of the solid craftsmanship of Ernst Röver.

Disposition:

Hauptwerk (I) C-f'''

Principal 16'
Bordun 16'
Principal 8'
Gambe 8'
Hohlflöte 8'
Gemshorn 8'
Zartgedackt 8'
Octave 4'
Flöte 4'
Quinte 2 2/3'
Octave 2'
Cornett 5f
Mixtur 3f
Trompete 8'

Schwellwerk (II) C-f'''

Gedackt 16'
Geigenprincipal 8'
Salicional 8'
Offenflöte 8'
Lieblich Gedackt 8'
Violino 8'
Voix céleste 8'
Fugara 4'
Flöte 4'
Waldflöte 2'
Mixtur 3f

Pedal C-d'

Offenbass 16'
Violon 16'
Subbass 16'
Gedacktbass 16'
Octavbass 8'
Cello 8'
Flötenbass 8'
Posaune 16'

Couplers etc.

I/P
II/P
II/I
sub-octave I/I
super-octave II/II
expression for manual II
crescendo
built on six unit chests with pneumatic action
wind pressure 95mm

 

 

 

 

Details

This page will be filled with more information shortly. Meanwhile have a look at the booklet accompanying the sampleset. You can download it from here.

Requirements
Licence Inform.

This sample set requires a powerful Windows-PC or Apple Mac-OS computer with 64-bit operating system and the Hauptwerk™ software Basic or Advanced Edition1 (version 4.0 or higher). A powerful CPU (e.g. a modern quadcore CPU) and sufficient main memory (RAM) are essential. The memory requirements for the Hauptwerk process with the sample set loaded are specified in the table below for the most important sample loading options.  

  compressed uncompressed
16 bit 3.5 GB 6.1
24 bit 6.4 GB 11.7

A Windows-PC will need about 1 GB additional memory for the operating system and other necessary processes, a Mac-OS computer should have about 30% additional memory available due to its different memory management system.

The compression used by Hauptwerk when loading samples is lossfree, i.e. loading samples compressed does not result in any loss of quality. It results however in an increase in CPU load of about 15% during playing. The best quality is obtained when loading the samples in 24-bit resolution, loading in 16-bit will cause a small but noticeable loss of quality. Since these options can be selected for each stop separately it is possible to individually adjust the options to match the available RAM.

Additional options are e.g. loading with 20-bit resolution (about 10% less memory required than 24-bit) or to only load the first loop of each sample (also about 10% reduced memory require­ment).   

Approximately 8 GB of free space is needed on the harddisc to install the sample set.

1 The Hauptwerk Basic Edition will only allow you to load the set in 16bit resolution. For best results the Advanced Edition of Hauptwerk is required.

 

Licence Agreement

The licence conditions for our sample sets conditions can be found here.

Images

Sound
Demonstrations

Here you will find sound demonstrations of this wonderful instruments shortly. Meanwhile you can listen to recordings on the Contrebombarde website. Please click on this link and select the entry "PLP - Roever Ditfurt" from the "organ" dropdown list.

Trial Version

This is the trial version of the Ernst Röver organ in Ditfurt (Germany). The trial version is fully functioning, but will periodically mute the sound. Please take this opportunity to try out the sample set before your purchase.

Installation of the trial version is a required prerequisite before installing the full version.


Please refer to our downloads page to download the trial version.

Available Options:
Please click on the small arrow at the right hand side of the selection field below to show the available options. You can select an option by clicking on it. Prices different from the product's standard price are shown in the selection list as well.
Shopping Cart
0 items
News Blog
(03/13/2024) Free Sample Set!
(11/18/2023) Pipeloops Winter Sale
(11/15/2023) Pipeloops Virtual Organ Concerts
Downloads
Freebies
Samplesets and trial versions
Patches
Reviews
Hauptwerk
Others

Shipping & Payment  |  Privacy Notice  |  Conditions of Use  |  Contact & Imprint

Copyright © 2008-2024 Pipeloops
Powered by osCommerce